ACCESS POINT AC LONG

Installation RequirementsCAT5/6 cablePhillips screwdriverDrill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting)Optional: Drywall or keyhole saw (to cut 18 milimet hole for Ethernet cable feed)

*

IMPORTANT: The UAP-AC-LR requires the UniFi Controller v4.7 or higher, available at: ui.com/download/unifi

System Requirements

LED

Ports

*

*

Locking Notch

*

Ethernet

*

Reset

*

Cable Feed Plug

The Locking Notch will be used with the Mounting Bracket to help secure the UniFi AP. (This is described further in the Mounting Bracket section.)

This Gigabit Ethernet port is used lớn connect the power & should be connected khổng lồ the LAN & DHCP server. Power nguồn can be provided by a UniFi Switch with PoE or Gigabit PoE adapter (included with single-pack only).

Bạn đang xem: Access point ac long

The Reset button serves two functions for the UniFi AP:

Restart Press & release the Reset button quickly. Restore to lớn Factory default Settings Press & hold the Reset button for more than five seconds.

If your Ethernet cable feeds along the mounting surface, remove the Cable Feed Plug.

Mounting Bracket

*

*

Locking Tab

During installation, the Locking Tab on the Mounting Bracket moves from the Initial Position to the Final Position, where the Locking Tab fits securely into the Locking Notch on the UniFi AP lớn help prevent theft.

*

*

Initial Position

Final Position

*

Note: If you need khổng lồ remove the UniFi AP from the Mounting Bracket, insert a paper video in the Slot to release the Locking Tab & turn the UniFi AP counterclockwise.

Hardware Installation

The device can be mounted on the wall or ceiling. Perform the steps for the appropriate installation.

Xem thêm: Phim Hàn Mới Nhất, Nhiều Thể Loại Hay Nhất, Top 21 Phim Hàn Quốc Hay, Mới Nhất 2021

Wall Mount

*

*


Optional

*

*


*

*


Optional

*


*

*

*

Ceiling Mount

*

*

*

*

*

*

*

*

*

Powering the UniFi AP

Use a UniFi Switch with PoE or a Gigabit PoE adapter for power.

Connecting to a UniFi Switch with PoE

Connect the Ethernet cable from the UniFi AP directly lớn a PoE port on the UniFi Switch with PoE.

*

UniFi Switch with PoE power nguồn Connection Diagram

*

*

Specifications

Dimensions

Weight

With Mounting Kits

Networking Interface

Buttons

Power Method

Power Supply

Max. Nguồn Consumption

Max. TX Power

2.4 GHz 5 GHz

MIMO

2.4 GHz 5 GHz

Throughput Speeds2

2.4 GHz 5 GHz

Range2

Antennas

Antenna Gain

Wi-Fi Standards

Wireless Security

BSSID

Mounting

Operating Temperature

Operating Humidity

Certifications

UAP-AC-LR

175.7 x 175.7 x 43.2 mm (6.92 x 6.92 x 1.70")

240 g (8.5 oz)

315 g (11.1 oz)

(1) 10/100/1000 Ethernet Port

Reset

Passive PoE (Pairs 4, 5+; 7, 8 Return)

24V, 0.5A PoE Gigabit Adapter1

6.5W

24 dBm 22 dBm
3 x 3 2 x 2
450 Mbps 867 Mbps

183 m (600 ft)

(1) Dual-Band Antenna, Tri-Polarity

2.4 GHz: 3 dBi, 5 GHz: 3 dBi

802.11 a/b/g/n/ac

WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)

Up to Four per Radio

Wall/Ceiling (Kits Included)

-10 to 70° C (14 lớn 158° F)

5 - 95% Noncondensing

CE, FCC, IC

1. Only the single-pack of the UAP-AC-LR includes a PoE adapter. 2. Speed và Range values may vary and are based on optimal environments.